Brighten Up® Series

Solatube® 160 DS and 290 DS Daylighting Systems

Bring Every Project to Life

The all new Solatube 160 DS and 290 DS Daylighting Systems set performance standards never seen before. These models feature our patented Raybender® 3000 Technology and LightTracker™ Reflector to deliver an Effective Daylight Capture Surface (EDCS) significantly higher than our previous 10 inch and 14 inch Solatube models and nearly double the EDCS of copycat products. Highly effective and simple to install, these models can transform dark interior applications and light more expansive spaces with multiple units creating a unique architectural effect.

Great for Bathrooms, Hallways, Corridors, Utility Rooms, Dens, Home Offices, Kitchens, Dining Rooms, and Closets.

Solatube
160 DS

Solatube
290 DS

Product Specifications

Tube Size (Diameter)

≈10 in
(250 mm)

≈14 in
(350 mm)

EDCS (Effective Daylight Capturing Surface)
This represents the surface area of the dome that collects and redirects sunlight. For comparison, a clear dome with no lens on a typical 10 inch tube system has an EDCS of 78.5 square inches.

160 in²
(1032 cm²)

290 in²
(1871 cm²)

Light Coverage Area

150 - 200 ft²
(14 - 19 m²)

250 - 300 ft²
(23 - 28 m²)

Potential Tube Length

20 ft+
(6 m+)

30 ft+
(9 m+)

Diffusers

160 DS

290 DS

Vusion™ Diffuser
For outstanding light diffusion that artfully blends to the ceiling plane, select the Vusion diffuser. The fresh design harmonizes with most décors, yet provides the radiance of natural light.

OptiView® Diffuser
Considered the ultimate in diffuser design, this technologically superior diffuser uses a Fresnel lens to deliver crystal clear daylight and a unique view of the sky.

Designer Touches

160 DS

290 DS

Frosted Shade
The Frosted Shade diffuser provides a clean contemporary look to any Solatube Daylighting System. The shade design provides a visual cutoff, producing a soothing comfortable light. The Frosted Shade can be optioned with either our OptiView® Diffuser or Vusion™ Diffuser.

Stainless-Tone Trim
Designed to complement any modern design, the Stainless-Tone Trim adds the visual edge to our Solatube Daylighting System. The Stainless-Tone Trim is designed to coordinate with metal-finished fixtures. The Stainless-Tone Trim can be optioned with either our OptiView® Diffuser or Vusion™ Diffuser.

	Effect Lenses Used with a diffuser, the Effect Lens adjusts the light and offers choices to soften or warm the light color. Options include:
	Natural (Clear) Effect Lens Provides brilliant white natural daylight. This lens comes standard.
	Warm Effect Lens Enhances natural daylight by warming the light creating a color comparable to incandescent bulbs.
	Softening Effect Lens Creates a subtle, softer natural lighting effect.
	Warm Softening Effect Lens Similar to the Warm Effect Lens, but a softer glowing effect.

Ventilation Add-On Kit
An integrated fan and lens design provides an attractive look. (Roof Vent Cap sold separately.)

Roof Vent Cap sold separately (see below)

Additional Motor Booster Kit is also available (see below)

	Light Add-On Kit When equipped with light add on kit, the Solatube Daylighting System provides the convenience of a switched light for night time use.
	Compact Fluorescent Light Add-On Kit Add a compact fluorescent fixture to use the Solatube Daylighting System as a recessed light fixture at night. Accepts (1) 26-watt compact fluorescent lamp (GX24q-3 Base, 26W 4-pin). Meets California Title 24 bath light requirements. (2) fixtures may be used with the 290 DS.
	Universal Light Add-On Kit with Medium Screw Base, 110V Add on a light fixture to use the Solatube Daylighting Device as a recessed light fixture at night. The 160 DS Light Add-On Kit accepts (1) 100-watt lamp. The 290 DS Light Add-On Kit accepts (2) 100-watt lamps. Up to 26-watt compact fluorescent lamps may be substituted.

Daylight Dimmer™
Because you don’t need 100% of the light 100% of the time, the innovative Solatube Daylight Dimmer easily controls the amount of daylight entering a room with the convenience of a switch. Our patented* variable butterfly baffle controls the light output.

Works with our Daylight Dimmer switch (sold separately)
* Patent #7,082,726

Flashings

160 DS

290 DS

For fast and easy installation, Solatube® flashings are available for nearly all roof types and pitches. The flashings provide complete protection and create an attractive appearance on the roof. They’re fabricated as a single, seamless piece to ensure leak-proof performance. Pitched flashings provide the optimal position for the dome to capture daylight on sloped roofs.

For Roof Pitches 0:12-3:12

No Pitch

Use on low pitched or flat roofs. Available in 4 in/100 mm or 6 in/150 mm heights.
Use 6 in/150 mm for areas prone to heavy snow loads and on commercial roofs.

Flat

For Roof Pitches 4:12-12:12

Pitched

Provides a horizontal opening on a sloped roof


Shingle	Shake/Slate	Metal* *Order metal roof kit

Universal Tile

Patent #7,168,211
Pitched or no pitch models are available.
Use standard pitched or standard no pitch flashing as a base.


Tile	Flat Tile

Curb Mounted


Standard	Metal

Accessories

160DS

290 DS

Spectralight® Infinity Extension Tubes
Extension tubes can be added in increments of 16 in/400 mm or 24 in/600 mm for long runs without sacrificing performance. The secret is the unrivaled reflectivity of Spectralight® Infinity tubing, making it possible to create up to 90 degree angles and long tube runs up to 30 ft/9 m.

Spectralight® Infinity 0-90 Degree Extension Tube
The 0-90 degree extension tube provides the ability to install around severe obstacles. With three built-in 30 degree angle adapters, this 0-90 degree extension tube gives you the flexibility to install just about anywhere. Using an innovative angle adaptor design, the 0-90 Degree Extension tube provides the superior performance that flexible tubes can't match. (Available in 23" length)

Flashing Turret Extensions
Use to raise the height of the Solatube dome on a roof to avoid snow, water, or shading from roof obstructions. Order additional Spectralight® Infinity tubing to accomodate turret height. Available in 2 in/50 mm, 4 in/100 mm, 12 in/300 mm, 24 in/600 mm, 36 in/900 mm and 48 in/1200 mm sizes.

2 in/ 50 mm Turret Extension installed on a tile roof.

Flashing Insulator
This insulating material helps to reduce flashing condensation in cold climates when the flashing is exposed to a humid interior space. The insulator is affixed to the flashing base and the top tube slips through the opening, which provides a seal between the interior and metal flashing.

Dome Edge Protection Band
For use on Class A, B, or C roofs to maintain fire rating.

Shock Inner Dome
High Velocity Wind Zone areas such as South Florida require the Solatube Shock Inner Dome. This highly impact-resistant inner dome can also be added to any installation for extra protection from extreme forces.

Daylight Dimmer™ Switch
Daylight Dimmer Switch Kit includes DPDT switch, wall plate and 15 ft/4.5 m of cable. Multiple Daylight Dimmers can be controlled by one switch.

Motor Booster Kit for Ventilation Add-On Kit
Ventilation Booster Motor Kit. Use with Ventilation Add-On Kit when extended duct requires additional air velocity.

Roof Vent Cap for Ventilation Add-On Kit
Ventilation Roof Vent Cap is for use with the Ventilation Add-On Kit (if no vent exists). Comes with gravity damper to prevent back flow.

ENERGY STAR qualified products and practices help you save money and reduce greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. EPA and U.S. DOE. The ENERGY STAR label also designates superior energy performance in homes and buildings.

Solatube International, Inc. is proud to offer our customers products with the ENERGY STAR label.

The Solatube 160 DS (10 in/250 mm Daylighting System) and the Solatube 290 DS (14 in/350 mm Daylighting System) are ENERGY STAR rated.

Website by Softnet