Smart LED

Decorative Fixtures

Occupancy Sensor

Daylight Dimmer

When it comes to lighting, it’s hard to beat the sun for endlessly bright, consistent lighting. The only downside is that it goes down each night, requiring homeowners to turn on electric lights to see after dark. The Solatube Smart LED System solves this problem using SunSense Technology, which blends LED lighting with sunlight to seamlessly illuminate rooms day and night. It’s the system that creates light in a smarter way.

Capture

Raybender^® 3000 Technology

A patented daylight-capturing dome lens that:

Redirects low-angle sunlight for maximum light capture
Rejects overpowering summer midday sunlight
Provides consistent daylighting throughout the day

LightTracker^™ Reflector

An innovative in-dome reflector that:

Redirects low-angle winter sunlight for maximum light capture
Increases light input for greater light output
Delivers unsurpassed year-round performance

Transfer

Spectralight^® Infinity Tubing

Tubing made of the world's most reflective material that:

Delivers 99.7% * specular reflectivity for maximum sunlight transfer
Provides the purest color rendition possible so colors are truer, brighter
Allows for run lengths over 30 feet to deliver sunlight to lower floors

Deliver

SunSense Technology

A patented control center that:

Continually assesses light levels and determines when supplemental light is needed
Automatically triggers LEDs to provide optimal light output
Seamlessly transitions from waning daylight to radiant LED light

* Specular reflectance greater than 99% with wavelength specific reflectance up to 99.7% for the visible spectrum

SunSense Technology: A Revolution in Lighting

High-performance Amplifier

Enclosed in a specially designed flared housing, the high-performance Amplifier features a patented design that utilizes16 highly reflective facets. These facets redirect light downward toward the Decorative Fixture at the most effective angle, maximizing light output for powerful performance.

Daylight Sensor

A Daylight Sensor continually monitors light levels within the tube and activates the LEDs when light levels reach a minimum threshold. It also deactivates the LEDs when sufficient daylight is present.

Light Optimization Lens

A patented Light Optimization Lens allows daylight to pass through and directs the light produced by the LEDs toward the Decorative Fixture.

Light Emitting Diodes (LEDs)

Four 3000K LEDs with an average 35 lumens / watt output provide ultra-energy efficient lighting designed to last up to 20 years. In addition, they complement existing lighting and deliver 80 CRI for a highly accurate display of colors.

Easy Connect Panel and Driver

A housing assembly designed with unique connectors for the driver, Secondary System, and Occupancy Sensor ensures easy installation.

Optional Occupancy Sensor

The Occupancy Sensor detects occupants and automatically triggers LEDs when light levels are low. Can be turned on or off when connected to a wall switch.

Rated for thermal efficiency

The Smart LED System has been designated as an ENERGY STAR^® product for its ability to minimize heat gain and heat loss. To earn this rating, a product must have a low Solar Heat Gain Coefficient (SHGC) and U-factor.

Award-winning innovation

The Smart LED System captured the coveted 2013 LightFair International Innovation Award with its cutting-edge, energy-efficient lighting design. Selected by an independent panel of renowned lighting professionals, it beat out more than 300 other lighting-related products.

Product Selection Guide

Models
Roof Flashings
Add-Ons
Accessories

Smart LED Primary Unit

Smart LED Secondary Unit

Solatube Smart LED Primary Unit

LEDs and daylighting unite to create the most energy efficient lighting for your home ever. Designed to light spaces up to 250 sq. ft., the Smart LED System works best in small- to mid-sized spaces like hallways, bathrooms, kitchens and closets. Use them in multiples for a dramatic effect in larger areas.

Tube Size ≈ 10 in. (250 mm)
Light Coverage Area ≈ up to 250 ft.² (23 m²)
Potential Tube Length ≈ 20 ft. (6 m)

No Pitch

Pitched

Universal Tile

Rolled Asphault / Membrane / Gravel Roof

Flashings

For fast and easy installation, Solatube flashings are available for nearly all roof types and pitches. The flashings provide complete protection, fabricated as a single, seamless piece to ensure leakproof performance.

No Pitch Flashing

Use on low pitched or flat roofs. Available in 4 in. (100 mm) or 6 in. (150 mm) heights
Use 6 in. (150 mm) for areas prone to heavy snow loads and on commercial roofs

No Pitch - 4 inch

4 inch

No Pitch - 6 inch

6 inch

Shingle Roof

Metal Roof

Shake Roof

Slate Roof

Flashings

Pitched Flashing

Provides a horizontal opening on a sloped roof

Spanish Tile Roof

Flat Tile Roof

Flashings

Universal Tile Flashing

Pitched or no pitch models are available
Use standard pitched or standard no pitch flashing as a base

Daylight Dimmer

Occupancy Sensor

Closed

Open

Daylight Dimmer

Bright sunlight flooding your home is great...unless you want to take an afternoon nap or use your entertainment center in the middle of the day. Never fear. The optional Daylight Dimmer solves this issue. Using a patented butterfly baffle and a convenient wall-mounted switch, the Daylight Dimmer lets you adjust room light levels simply and easily.

Double Pole Double Throw (DPDT) Switch

Daylight Dimmer Switch Kit (sold separately) includes DPDT switch, wall plate and 30 ft./9 m of cable. Multiple Daylight Dimmers can be controlled by one switch.

Spectralight Infinity Tubing

Spectralight Infinity 0-90 Degree Tubing

Flashing Turret Extensions

Flashing Insulator

Dome Edge Protection Band

Shock Inner Dome

Spectralight® Infinity Extension Tube

Extension tubes can be added in increments of 16 in. (400 mm) or 24 in. (600 mm) for long runs without sacrificing performance. The secret is the unrivaled reflectivity of Spectralight® Infinity tubing, making it possible to create up to 90 degree angles and long tube runs up to 30 ft. (9 m).

Spectralight® Infinity 0-90 Degree Extension Tube

Provides superior performance that flexible tubes can’t match. An innovative design with three built-in 30 degree angle adapters that give you the flexibility to install around obstacles. Available in 23 in. (580 mm) length.

Flashing Turret Extensions

Use to raise the height of the Solatube dome on a roof to avoid snow, water, or shading from roof obstructions. Order additional Spectralight® Infinity Tubing to accommodate turret height. Available in 2 in. (50 mm), 4 in. (100 mm), 12 in. (300 mm), 24 in. (600 mm), 36 in. (900 mm) and 48 in. (1200 mm) sizes.

Flashing Insulator

This insulating material helps to reduce condensation in cold climates when the flashing is exposed to a humid interior space. The insulator is affixed to the flashing base and the top tube slips through the opening, which provides a seal between the interior and metal flashing.

Flashing Insulator - 160 DS

160 DS

Flashing Insulator - 290 DS

290 DS

Dome Edge Protection Band

Made of galvanized steel, this optional component is designed for use on Class A, B, or C roofs to maintain fire rating.

Shock Inner Dome

High Velocity Wind Zone areas such as South Florida require the Solatube Shock Inner Dome. This high impact-resistant inner dome can also be added to any installation for extra protection from extreme forces.

Solatube Daylighting Systems

Solatube Smart LED

Solar Star Attic Fans

Capture

Raybender^® 3000 Technology

LightTracker^™ Reflector

Transfer

Spectralight^® Infinity Tubing

Deliver

SunSense Technology

SunSense Technology: A Revolution in Lighting

High-performance Amplifier

Daylight Sensor

Light Optimization Lens

Light Emitting Diodes (LEDs)

Easy Connect Panel and Driver

Optional Occupancy Sensor

Rated for thermal efficiency

Award-winning innovation